Table of Contents
Advertisement
Available languages
Available languages
Networked Charging Station Installation
The screws for attaching the mounting brackets to the charger are provided. Screws for securing the charger to another surfa
ce are not included.
Important: The top of the screw must extend exactly 9/64 (0.149) inches (3.78 mm) above the surface (about 4 ½ threads).
Screws must be able to support 99.6 oz (2.8 kg) weight of charger.
•
Use the screws that best fit the thickness of the surface.
•
Use at least 3 screws to secure each mounting bracket to the charger.
•
Use at least 3 screws on each side to secure the mounting brackets to the rack or wall.
To install the charger:
1.
Screw the mounting brackets to each side of the charging station.
Shure Incorporated
28/94
Advertisement
Table of Contents
