• 4 wood screws, 1.25 cm (1/2 in.) RACK MOUNTING The SCM410 is supplied with hardware for mounting one or two units Dual Mixer (Full Rack) Installation to a 19-inch audio equipment rack. The hardware can also be used to 1.
3. Adjust the Master level control for the required output level, as during very loud speech or noise. indicated by the output peak meter. The SCM410 is now ready for 2. Adjust the Low-Cut and High-Frequency controls adjacent to each use.
SPECIFICATIONS Measurement Conditions (unless otherwise specified): Line voltage 120 Vac, 60 Hz (SCM410) or 230 Vac, 50 Hz (SCM410E); full gain; 1 kHz, one channel activated; source impedances: Mic 150 ; terminations: Line/Mic Aux 10 k Frequency Response (at 1 kHz, channel controls centered) Operating Voltage 50 Hz to 20 kHz 2 dB;...
CAUTION: Use of Advanced Functions is recommended only for qualified audio technicians. LOGIC CONNECTION SPECIFICATIONS The SCM410 logic functions expand the range of installation and con- LOGIC CONNECTIONS trol options. Logic can be used for everything from simple cough switches...
Page 13
EXTERNAL LOGIC DEVICES For information on the inhibit function, refer to the Internal Modifica- SCM410 logic levels are directly compatible with TTL and 5V CMOS tions Addendum. logic families. Mixer logic may be used with 15V CMOS logic if a pull-up resistor is used with each GATE output.
Page 14
United States, Canada, Latin Asia, Pacific: Europe, Middle East, Africa: America, Caribbean: Shure Asia Limited Shure Europe GmbH Shure Incorporated 22/F, 625 King’s Road Jakob-Dieffenbacher-Str. 12, 5800 West Touhy Avenue North Point, Island East 75031 Eppingen, Germany Niles, IL 60714-4608 USA...
Need help?
Do you have a question about the SCM410 and is the answer not in the manual?
Questions and answers