Quick Ice Making - Panasonic NR-YW590Y Operating Instructions Manual

Prime Freeze
Remark
Always place food on the aluminum heat transfer plate for the best effectiveness of cooling.
When hot or wet food is placed on the aluminum heat transfer plate without a lid or food
wrapper, the surface of the food may be frozen and the inside of Freezer room may be
frosted. If you are worry, please use lids or food wrapper.
If cooked food is still at a high temperature, it should be cooled down to about 70 °C before
putting in the Prime Freeze case.
Leaving a glass bottle or can inside the compartment may pose a risk of broken, cracking,
or damage.
Do not place the food which is higher than the height of the Prime Freeze case to avoid the
risk that the Prime Fresh case does not close completely, causing frost and damaging food
or food containers in the room.
Do not touch the metal food container directly with wet hands, as there is a risk of frostbite.
During the operation of Prime Freeze:
• ECONAVI operation will be stopped.
• The noise from the fan will be louder.
• The power consumption will be higher than normal.
• If Quick Ice Making are set, Prime Freeze will be stopped.
•
normal phenomenon.
When Prime Freeze is not in use, this case can also be used as any other position in the
Freezer room.
•
• The temperature in this room may be higher than the temperature in the entire Freezer
room. For long-term preservation, please transfer food to the Freezer room.

Quick Ice Making

When setting Quick Ice Making, the refrigerator will increase its capacity to reduce ice making
time.
How to operate Quick Ice Making
Light is on: Quick Ice Making is operated.
Light is off: Quick Ice Making is not operated.
Remark
The following modes will be stopped when Quick Ice Making is turned on:
• Quick Freezing
• Prime Fresh+
• Prime Freeze
• Auto Ice Off
20
Press the "Quick Ice Making" icon twice in a row to start
Quick Ice Making. Then, the icon of Quick Ice Making will
turn on.
When you want to stop quick ice making, press the "Quick
Ice Making" icon once until the light turns off.