Prime Freeze - Panasonic NR-YW590Y Operating Instructions Manual

Prime Freeze

Prime Freeze is a separate room located inside the Freezer room. This compartment is
equipped with an individual fan system and high-class aluminum heat transfer plate, and
modes to adjust the cooling time according to each food processing purpose in order to
support the user in preparing dishes in a variety of way and save time.
How to operate Prime Freeze
1 Press the icon of the Prime Freeze compartment on the Operation Panel. Then, the LED
indicates position of the compartment, the LED indicates mode 1-2-3(*) and the LED
indicates operating time(**) of the Prime Freeze will turn on when selected.
Icon
(*) For LED indicates mode 1-2-3:
• If the previous setting has not run out of time, the light will display the previous setting
mode.
• If there is no time left from the previous setting, all LED indicates mode 1-2-3 will turn off.
(**) For LED indicates operating time:
• If the previous setting has not run out of time, the remaining minute value will be
displayed.
• If there is no time left from the previous setting, the minute value will be displayed as "--".
2 Continue to press the icon of the Prime Freeze compartment, then the LED indicates
minute value will be cleared and displayed back to "--". Press the icon of the Prime Freeze
until the desired mode is selected. Each time the button is press, the LED indicates
operating time will show the time in each respective mode.
3 Complete the setting
settings that you have just made. Or if no other button is pressed within 10 seconds, the
Operation Panel will save the setting and return to stand by mode.
4 End mode
After the setting time of a mode running out, the Operation Panel will display the time back
to "0"
2 minutes for 6 minutes, until you press the "Prime Freeze" icon on the Operation Panel or
when the Freezer room door is opened. If you do not take food out immediately after the
end of the mode, your food may be frozen more than desired.
18
LED indicates
Compartment position of the
Prime Freeze
compartment
LED indicates
mode 1-2-3
LED indicates
operating time