Panasonic NR-YW590Y Operating Instructions Manual page 82

LED lamp and grounding
The refrigerator LED lamp, specially designed for this refrigerator, do not replace it by
yourself. If you need replacement, please contact Panasonic Service Center.
If there is no grounding wiring plug in refrigerator, it should be connected with grounding
connection to prevent electrical hazard from electric leakage.
Moving or shifting
1 Remove ice in the Ice Trays and Ice Box, water in the Water
Tanks.
2 Unplug the refrigerator.
3 Adjust the adjuster bolts (left and right) so that they do not touch
4 Place a container underneath the drainage hole, then slowly tilt
the refrigerator backward to drain water from the drainage hole.
This action requires 4 or more people, of which 2 people lift the
front of the refrigerator to prevent the refrigerator from sliding
and avoid the risk of accidents.
※ How to move and transport
At least 4 people are required to transport the refrigerator.
Each person lifts a corner of the refrigerator.
Do not transport by holding the refrigerator doors.
Caution
When transporting, use straps to secure the refrigerator doors
and avoid letting the doors open by itself.
Do not place the refrigerator on its side when transporting, as
this may cause damage to the refrigerator.
After installation, wait at least 4 hours before plugging in the power to ensure that the
gas and oil in the compressor are in a stable state.
10
Drainage hole
Use straps to
secure