Panasonic NR-YW590Y Operating Instructions Manual page 102

How to Clean the Refrigerator
Prime Freeze case
Removing
1 Pull out the Prime Freeze completely.
2 Lift the case, tilt it, and lift it out of the compartment diagonally.
Attaching
1 Pull out the Prime Freeze case, lift the back of the case and hook along the inner
grooves until it matches and touches the end point.
Remark
The aluminum heat transfer plate can be removed; however, remember not to hold it with
wet hands when the aluminum plate is cold, as there may be a risk of frostbite.
When removing or installing the case, be sure to grasp the tray handle with your
Please refer to the illustration above.
If cleaning by water, wipe the aluminum plate or allow it to dry before reinstalling into the
refrigerator.
Do not wipe the lubricant off the contact surface of the guide rail.
If you have wiped out the lubricant, please contact with the Service Center.
Ice box
Removing
Lift and pull the Ice box forward
until it is completely removed.
Attaching
Push the Ice box until it
reaches the end of the
Ice box holder.
30
Aluminum heat transfer plate
(Note that the aluminum plate
is easy to be scratched and
deformed)
Remark
Stop the Auto Ice making function before
cleaning the Ice box (Page 21).
Once every 3 months
Once every 3 months