Midea EGV 4.45 User Manual page 92

Step 2: installation of the panel
The wooden panel can be worked according to the installation drawings.
Fully integrated model
Attach the hook to the wooden panel and insert the hook into the slot of the
outer door of the dishwasher (see figure A). After positioning the panel, it is
fixed to the outer door with screws and bolts (see figure B).
A
Step 3: Adjusting the door spring tension
1. The door springs are adjusted at the
factory to the correct tension for the
outer door. If wooden panels are
installed, you must adjust the door
spring tension. Turn the adjusting
screw to use the adjuster to tension
or loosen the steel cable.
2. The door spring tension is correct if
the door remains horizontal in the
fully open position but folds up to
close with a light touch of the finger.
1. Remove the four short screws.
B
2. Insert the four long screws.
35