Midea EGV 4.45 User Manual page 80

Saving Energy
1. Pre-rinsing of tableware items leads to increased water and energy
consumption and is not recommended.
2. Washing tableware in a household dishwasher usually consumes less
energy and water in the use phase than hand dishwashing when the
household dishwasher is used according to the instructions.
Floor Indicator Lamp
NOTE:
The Indicator lamp will be lit up
during the washing program,
then blink for 5 minutes and
extinguished on the end of the
program.
Staring a wash cycle
1. Pull out the lower and upper basket, load the dishes and push
back the baskets. We recommend loading the lower basket first,
then the upper basket.
2. Add detergent.
3. Plug the power plug into the socket. Power supply: see last page of
the product data sheet. Make sure that the water supply is switched
on completely.
4. Open the door and press the power button.
5. Select a program, the answer lamp will light up. Then close the door.
The dishwasher will now start the wash cycle.
Changing the programme during the wash cycle
You can only change a wash cycle, if it has only been running for a short
time. Otherwise, the detergent may have already been released and the
23