Midea EGV 4.45 User Manual page 81

dishwasher may have already drained the rinse water. If this is the case, the
dishwasher must be reset and the detergent dispenser refilled. Follow these
instructions to reset the dishwasher:
1. Open the door slightly to stop the dishwasher. When the movement
of the spray arm has stopped, you can open the door fully.
2. Press the program button for more than three seconds to put the
appliance in standby mode.
3. You can now change the program.
Auto Open
After washing, the door will open automatically to achieve better drying effect.
NOTE:
The dishwasher door must not be
blocked when set to open
automatically. This can disrupt door
lock functionality.
Forgotten item
Recommend adding the forgotten items only before the detergent
dispenser is opened to ensure the correct washing performance. Follow
the instructions below to add a forgotten item:
1. Open the door slightly to stop the wash cycle.
2. When the movement of the spray arm has stopped, you can open the door
fully.
3. Add the forgotten item.
4. Close the door.
3 seconds
24