Midea EGV 4.45 User Manual page 87

Electrical requirements
Look at the type of plate to check the rated voltage and connect the
dishwasher to a suitable power supply. Use the required 10A/13A/16A
fuse, a time-delay fuse or a recommended circuit breaker and provide a
separate circuit that supplies power to this appliance only.
Electrical connection
Ensure that the voltage and frequency of the power supply correspond to
the specifications on the rating plate. Only insert the plug into a power
outlet that has been properly earthed. If the power outlet to which the
appliance must be connected is unsuitable for the plug, replace the power
outlet instead of using an adapter or equivalent, as this may result in
overheating and fire.
Ensure that the appliance is proper earthed prior to use.
Water supply and drainage
Cold water connection
Connect the cold-water safety supply hose to a threaded 3/4
(inch) connector and make sure it is securely attached. If the
water pipes are new or have not been used for a long period of
time, let the water run to ensure that the water is clear. This
precaution is necessary to avoid the risk of blocking the water
supply and damaging the appliance.
safety supply hose
Information on the safety supply hose
The safety supply hose consists of double walls. The hose system blocks the
flow of water if the supply hose ruptures and the air space between the supply
hose and the outer corrugated hose is filled with water.
30