Table of Contents
Advertisement
WARNING
CALIFORNIA
Proposition 65 Warning
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
This machine is a tow-behind attachment intended
to be used by professional, hired operators in
commercial applications. It is designed primarily to
brush natural grass and synthetic turf and redistribute
infill. Using this product for purposes other than its
intended use could prove dangerous to you and
bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit
www.Toro.com/Bullseye
operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Bullseye parts,
or additional information, contact an Authorized
Service Dealer or Bullseye Customer Service and
have the model and serial numbers of your product
ready.
Figure 1
identifies the location of the model
and serial numbers on the product. Write the numbers
in the space provided.
1. Model and serial number location
© 2021-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
for product safety and
Figure 1
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 3
General Safety ................................................... 3
Safety and Instructional Decals .......................... 3
Setup ........................................................................ 4
Assembling the Brush......................................... 4
Product Overview ..................................................... 6
Specifications .................................................... 6
Attachments/Accessories ................................... 6
Operation .................................................................. 6
During Operation Safety ..................................... 6
Operating Tips .................................................... 7
Storage ..................................................................... 8
Storage Safety.................................................... 8
Preparing the Machine for Storage ..................... 8
g354019
2
Figure 2
Contact us at www.Toro.com/bullseye.
Printed in the USA
All Rights Reserved
g000502
Advertisement
Table of Contents
