Table of Contents
Advertisement
Product Overview
Specifications
Working width
Weight
Minimum traction unit
output-power rating
Attachments/Accessories
A selection of Bullseye approved attachments and
accessories may be available for use with the machine
to enhance and expand its capabilities. Contact your
Authorized Service Dealer or authorized Bullseye
distributor or go to www.Toro.com/Bullseye for a list of
all approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Bullseye
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
1.85 m (72.83 inches)
50 kg (110 lb)
7.5 Kw (10 hp)
Operation
During Operation Safety
General Safety
•
The owner/operator can prevent and is responsible
for accidents that may cause personal injury or
property damage.
•
Wear appropriate clothing, including eye
protection; long pants; substantial, slip-resistant
footwear; and hearing protection. Tie back long
hair and do not wear loose clothing or loose
jewelry.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not operate the machine when tired, ill, or
under the influence of alcohol or drugs.
•
Never carry passengers on the machine and keep
bystanders and pets away from the machine
during operation.
•
Operate the machine only in good visibility to avoid
holes or hidden hazards.
•
Keep your hands and feet away from moving parts.
•
Look behind and down before backing up to be
sure of a clear path.
•
Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure your
vision.
•
Disengage the attachment (if applicable) whenever
you are not using it.
•
Stop the machine, shut off the engine, remove the
key, wait for all moving parts to stop, and inspect
the machine after striking an object or if there is
an abnormal vibration in the machine. Make all
necessary repairs before resuming operation.
•
Slow down and use caution when making turns
and crossing roads and sidewalks with the
machine. Always yield the right-of-way.
•
Reduce speed on rough roads and surfaces.
•
When the attachment is connected to a traction
unit and in the raised position, the weight of it
affects stability, braking, and steering. Exercise
caution when transporting between working areas.
•
Never leave a running machine unattended.
•
Before leaving the operating position, do the
following:
– Park the machine on a level surface.
– Engage the parking brake.
– Lower the attachment.
– Shut off the engine and remove the key.
6
Advertisement
Table of Contents
