Manufactured by: Dreame (Tianjin) Information Technology Co., Ltd. (a Mi Ecosystem company)
Address: Room 2112-1-1, South District, Finance and Trade Center, No.6975 Yazhou Road, Dongjiang Bonded Port Area, Tianjin Pilot Free Trade Zone, Tianjin, China
Safety Information Read this manual carefully before use, and retain it for future reference. Do not place the vacuum-mop upside down. Do not move the vacuum-mop by using its LDS laser sensor cover, top cover, or bumper as a handle. This product is for floor cleaning in a home environment only.
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: a cool, dry place. Recharge the vacuum-mop at least once every 3 months to avoid over-discharging http://www.mi.com/global/service/support/declaration.html For detailed e-manual, please go to www.mi.com/global/service/userguide the battery.
Product Overview Vacuum-Mop Accessories Pre-installed Accessories Power/Clean Button Power on/off: Press and hold for 3 seconds Clean: Press to start cleaning after the vacuum-mop is powered on Brush Dust Compartment Spot/Dock Button Press to send vacuum-mop back to charging dock Press and hold for 3 seconds to start Spot Clean mode Other Accessories Indicator...
Vacuum-mop and Sensors Dust Compartment Mopping Assembly Dust Compartment Clip Water Tank Cliff Sensor Wi-Fi Indicator Omnidirectional On: Wi-Fi connected Dust Compartment Cover Wheel Blinking: Awaiting Water Filling Opening connection/Connecting Charging Contacts Filter Off: Wi-Fi is not connected Side Brush Water Tank Release Button Mop Pad Edge Sensor...
You will be directed to the connection setup page automatically turn on and begin charging. if the app is installed already. Or search "Mi Home/ 7714C808 After 10 minutes of the full charge of the battery, the indicator goes off.
Page 7
If the vacuum-mop does not function properly after being restarted, use While the vacuum-mop is running, press any button on the vacuum-mop More features are available in the Mi Home/Xiaomi Home app, including a pin to press the reset button until you hear a voice saying "Restoring to pause it, and then press the button to resume the cleaning.
* Monthly cleaning is recommended. mop until it clicks into place. Press the button or use the Mi Home/ 1. Flip the vacuum-mop over and pinch the clips to remove the brush cover. 1. Flip the vacuum-mop over and remove the side brush upwards to clean it.
Page 9
Sensors and Charging Contacts Dust Compartment 3. Add clean water to the dust compartment, and close the dust 5. Place the dust compartment and filter aside to dry before reinstallation. * Weekly cleaning is recommended. compartment cover, then shake the compartment back and forth, finally Note: Filter must be fully dry before use.
Location permissions are not enabled. Please ensure your device has location permissions enabled recharged at least once every three months. for the Mi Home/Xiaomi Home app. What should I do when the vacuum-mop The Wi-Fi signal is weak. Make sure the vacuum-mop is in an area with good Wi-Fi coverage.
Specifications Vacuum-Mop Charging Dock Issue Possible Cause and Solution Name Robotic Vacuum Cleaner Why doesn't the vacuum-mop carry out the Check whether the battery level is sufficient. The vacuum-mop needs to have a battery level of 15% Model CDZ2103 scheduled cleanup? or more to start a scheduled cleanup.