Only use the original charging adapter. Never use an unoriginal adapter, as this may cause the lithium battery to catch re. (The charger is not compatible with Mi Handheld Vacuum Cleaner.) Do not use the vacuum to pick up ammable or combustible liquids, such as gasoline, or bleach, ammonia, drain We Dreame Technology (Tianjin) Limited, hereby, declares that this equipment is in compliance with the applicable cleaners or other liquids.
Installation Vacuum and Accessories Installation Diagram Installing the 2-in-1 Charging & Storage Mount 1. The 2-in-1 charging & storage mount is an optional accessory, you 4. It is recommended to hire a professional to install the mount and to can install it based on your requirements. use protective clothing, goggles, and other protective equipment where necessary.
5 minutes, and the vacuum will enter to cool down for 30 minutes before charging it. the energy-saving mode. Charging adapter is not compatible with Mi Handheld Vacuum Please read the Safety Instructions in this User Manual before Cleaner.
Care & Maintenance Tips Cleaning the Cyclone Assembly Always use genuine parts to keep your warranty from being voided. 1. Rotate the cyclone assembly in the direction illustrated to unlock it, 2. Rinse the cyclone assembly with water until it is clean. To thoroughly then remove the cyclone assembly.
Page 7
Care & Maintenance Cleaning the HEPA Filter Assembly Cleaning the Soft Roller Brushbar and Electric Mite Clean the Electric Mite Brush Brush 1. Place the vacuum securely on a at surface, then turn the HEPA lter 1. Use a coin as illustrated to rotate the lock counterclockwise until you 3.
Specif ications Troubleshooting If the vacuum is not working properly, please refer to the table below. Cordless Vacuum Cleaner Soft Roller Brushbar Model SCWXCQ02ZHM Model 1C-01 Errors Possible Causes Solutions Dimensions 1208×256×204.5 mm Rated Voltage 25.2 V Vacuum is out of battery or low on power.