Recording An Audio Track 录制一个音轨 - PRESONUS AudioBox GO Owner's Manual

Note: Instrument tracks are nearly identical to audio tracks. The Input Source list for Instrument tracks
lists available external MIDI devices as well as any virtual instruments that have been added to the Song.
注意：乐器音轨与音频音轨几乎相同。乐器音轨的输入源列表列出了可用的外部 MIDI 设备，以及已经添
加到歌曲中的任何虚拟乐器。
6.1 Recording an Audio Track 录制一个音轨
To begin recording, create an audio track from the Add Tracks window, set its input to Input 1 on your
interface, and connect a microphone to the same input.
开始录音，从 "Add Tracks 添加音轨" 窗口创建一个音轨，将它的输入设置到你接口上的 "Input
1"，并将一个麦克风连接到同一输入。
Select Record Enable on the track. Turn up the Input 1 level on your audio interface while speak-
ing/singing into the microphone. You should see the input meter in Studio One Prime react to the input.
Adjust the gain so the input level is near its maximum without clipping (distorting).
You are now ready to start recording. For complete instructions, please consult the Studio One Refer-
ence manual located in Help | Studio One Reference Manual.
在轨道上选择 "启用录音"。在对着麦克风说话/唱歌时，调高音频接口上的"Input 1"电平。你应该看到
Studio One Prime 中的输入表对输入的反应。调整增益，使输入电平接近其最大值，而不出现削波（失
真）。
现在你已经准备好开始录音了。如需完整的说明，请参考《帮助》中的《Studio One参考手册》。
6.2 Adding Virtual Instruments and Effects 27