PRESONUS AudioBox GO Owner's Manual page 24

If you do not have any MIDI devices, please skip to Section 4.3.
如果你没有任何 MIDI 设备，请跳到4.3节。
Setting up an External MIDI Keyboard Controller from the Start Page
从开始页设置一个外部 MIDI 键盘控制器
A MIDI keyboard controller is a hardware device that is generally used for playing and controlling other
MIDI devices, virtual instruments, and software parameters. In Studio One Prime, these devices are
referred to as Keyboards, and they must be configured before they are available for use. In some cases,
your MIDI keyboard controller is also used as a tone generator. Studio One Prime views the controller
and tone-generation functions as two different devices: a MIDI keyboard controller and a sound module.
The MIDI controls (keyboard, knobs, faders, etc.) will be set up as a Keyboard. The sound modules will
be set up as an Instrument.
MIDI键盘控制器是一种硬件设备，一般用于演奏和控制其他MIDI设备、虚拟乐器和软件参数。在
Studio One Prime 中，这些设备被称为键盘，它们必须经过配置才能使用。在某些情况下，你的 MIDI
键盘控制器也被用作音色发生器。Studio One Prime 将控制器和音调发生器的功能视为两个不同的设
备：一个 MIDI 键盘控制器和一个声音模块。MIDI 控制器（键盘、旋钮、推子等）将被设置为键盘。声
音模块将被设置为一个乐器。
You can set up your external MIDI devices from the Setup area in the Start page. Before setting up a new
Song for recording, take a moment to configure external devices.
你可以在 "开始" 页面的 "设置 " 区域设置你的外部 MIDI 设备。在设置新的歌曲进行录音之前，花点时间
来配置外部设备。
Make sure you have connected the MIDI Out of your external MIDI controller to a MIDI In on your PreSo-
nus audio interface (if available) or other MIDI interface. If you are using a USB MIDI controller, connect it
to your computer and power it on.
确保你已经把外部 MIDI 控制器的 MIDI 输出连接到PreSonus音频接口（如果有的话）或其他MIDI接口
的MIDI输入。如果你使用的是USB MIDI控制器，请将它连接到你的电脑上并接通电源。
Click on the Configure External Devices link in the Setup area on the Start page to launch the External
Devices window.
点击 "开始" 页面设置区的 "配置外部设备" 链接，启动 "外部设备" 窗口。
4.4 Configuring MIDI Devices 21