Download Print this page

Samsung RL62SB Series User Manual page 12

Hide thumbs Also See for RL62SB Series:

Advertisement

6
2
Assemble the left upper hinge on
the left side by using 3 bolts and
reattach the ground wire using
1 screw. You can get the hinge
from the installation tool box
supplied with your new Samsung
refrigerator. (Be careful not to tip
over the fridge door and have
wire damage.)
LEVELING THE REFRIGERATOR
After putting the doors back on the Refrigerator,
make sure the Refrigerator is level so that you can
make final adjustments.
If the Refrigerator is not level, it will not be possible
to get the doors perfectly even.
Also it is possible to sweat in the refrigerator and ask
more energy bills.
For example, when the left side is lower than the
right side, insert a flat-blade screwdriver into a notch
on the left control lever, and turn it clockwise or
counter clockwise to level the door.
Turning it clockwise to raise the refrigerator and
counterclockwise to lower it.
For the left side is higher, do it with right lever.
12_ setting up
DA68-01817M-EN.indd
12
6
1
2
3
Disassemble 2 connectors
(1 and 2),and then assemble 2
connectors (2 and 3).
(If it is not connected, error
message will be shown on the
display)
Both control levers must be surely touching
the floor to avoid the possible personal injury
CAUTION
or property damage because of tipping.
When the left
side is lower.
Screwdriver(-)
6
Replace the left upper hinge
cover with using 1 screw. You
can get it from the installation
tool box supplied with your new
Samsung refrigerator.
Check the door alignment, opening,
and inner lamp operation by opening
the fridge and freezer doors.
When the left
side is higher.
Control Lever
Screwdriver(-)
2011.1.11
3
5:14:30 PM

Advertisement

loading