Advertisement
1
Disassemble ground wire
by removing 1 screw, and
disassemble right upper hinge
by removing 3 bolts. Use caution
to avoid wire damage. Be careful
not to tip over the fridge door
when unscrewing the bolt.
2
Remove 1 screw (use
screwdriver) and 2 bolts (use
3/16 allen wrench), and then
remove right side middle hinge.
3
Cap
Cap
Separate the cap of the front left
leg side of the Cover and insert it
on the front right leg side of the
Cover.
10_ setting up
DA68-01817M-EN.indd
10
Remove the fridge door by lifting
it straight up. Be careful not to
drop or scratch the fridge door.
(Middle hinge cap may come off
with the fridge door.)
Remove the freezer door by
lifting it straight up. (Low hinge
cap may come off with the
freezer door.)
Be careful not to drop or scratch
the freezer door.
4
4
3
Remove 2 bolts of each hinge
and remove both right and left
side bottom hinges.
2
Disassemble Middle hinge cap.
(Middle hinge camp may come
off with the fridge door when
removing the door.)
4
Cap
Cover
Separate front leg cover by
removing 2 screws.
4
Separate low hinge shaft
by using 5/32 wrench and
disassemble low hinge leg by
turning it colockwise, and then
assemble the low hinge by
turning it over.
2011.1.11
5:14:23 PM
Advertisement
