Download Print this page

Samsung RL62SB Series User Manual page 11

Hide thumbs Also See for RL62SB Series:

Advertisement

4
3
Reattach the former right hinge
on the left side and the former
left hinge on the right side by
using 2bolts.
5
2
Remove 1 cap and 3 screws on the
left side of the refrigerator where
you will reattach the left side middle
hinge. (Refer to the left picture.) And
replace them on the former right side
middle hinge position like the right
picture. When removing 2 plastic
screws, pick them up with tweezers
(forceps, nippers, pliers) while
turning them with screwdriver(+).
8
Separate the stopper(①) by
removing 3 screws on the right side.
(Refer to the picture.) And replace
them on the right side. Remove 3
screws on the left side. (Refer to
the picture.) And then, replace the
stopper(①) separated from the right
side. And reattach it by using those
removed 3 left side screws on the
left side.
DA68-01817M-EN.indd
11
11
Separate stopper by removing
1 screw on the right lower
side of freezer and assemble
the stopper on the left side by
reversing it.
2
1
Replace the freezer door on the
left side bottom hinge. Replace
the left side middle hinge. You
can get it from the installation
tool (box) supplied with your
new Samsung refrigerator.
And reattach it by using 1
screw and 2 bolts. (Should use
screwdriver(+) for screw and
wrench for bolts.)
13
14
7
After removing cap on the upper
left side of fridge door, reattach
the fridge door on the right side.
10
Replace the bottom hinge cap
cover.
5
Cover the middle hinge cap.
6
Separate the cover on the left
upper side of refrigerator by
removing 1 screw, and reattach
it on the right upper side. (Be
careful not to strip wire coating.)
1
setting up _11
2011.1.11
5:14:28 PM

Advertisement

loading