3. Installation and Wiring
This chapter introduces how an SCM module connects to an MPU
3.1 Installation
The MPU of the PLC connects to the SCM module.
Adjust the clips connecting to the left-side module on the MPU.
Direct the I/O module to the interface on the MPU, and combine the I/O module with the MPU as
shown in the figure below.
Tighten the clips connecting to the left-side module on the MPU.
The SCM module connects to other I/O modules.
Before the SCM module connects to the inferior I/O module, the fixing clip for the I/O module has to be
loosened by the screwdriver, and the side cover has to be opened.
DVP-PLC Operation Manual
Communication Module DVPSCM12/52-SL
DVP28SV
.
5