Digital Watchdog VMAX IP Plus User Manual page 54

53 | VMAX IP Plus™ NVR
Transaction Verification Settings
Transaction verification equipment can be connected to NVR through the RS-232 port or LAN.

NO
Port Number of the Serial connection. For example: NO1 = COM1, NO4 = COM4.
CAM
Assign a camera to the Transaction Verification device.
TYPE
Connection type between NVR and Transaction Verification device.
PROTOCOL
The communication protocol between NVR and Transaction Verification device.
SAVE
Enable or disable the NVR to save the transaction data.
SHOW
Enable or disable the NVR to display the transaction data.
SETUP (1)
Transaction Verification Settings
• NO: ID# of Transaction Verification device.
• CAMERA: Select the camera to assign to the
Transaction Verification device.
• TYPE: Select COM (RS-232) or TCP/IP (LAN)
• DEVICE IP: Input the IP address of the Transaction
Verification device when it is connected through
the network.
• PROTOCOL: Communication protocol between
NVR and the Transaction Verification device.
1. TEXT-IN: Receive an ASCII character.
2. SNVR-POS: Manufacturer's protocol.
Contact your Transaction Verification dealer for
information.
• START CHARACTER: Input the assigned character
-53-

