The Jacks On The Back Of The Dvd Player - GE GE1101P User Manual

Connections and Setup

The Jacks on the Back of the DVD Player

When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right
Audio to Right Audio, etc.
AUDIO OUT R and L
Insert audio cables (left
and right) from these jacks
on your DVD player to the
corresponding Audio
Input jacks (left and right)
on your TV or receiver.
AUDIO OUT
R
1
R
2
S-VIDEO
If your TV has an
S-Video jack, you can
connect an S-Video
cable for increased
video quality. The
S-Video cable only
carries the picture
signal; remember to
connect the left and
right audio cables.
16 _______________________________________________________________ chapter 1
VIDEO OUT
(Composite Video Output)
Connect a video
cable to this jack and
to the Video Input
jack on your TV.
DIGITAL AUDIO OUT
VIDEO OUT
COAXIAL
L
1
OPTICAL
L
2
S-VIDEO
DIGITAL AUDIO OUT
Use a digital optical cable
(not provided) to connect
your DVD Player to a
compatible Dolby Digital or
DTS receiver or decoder.