Table of Contents
Advertisement
Note:
[NUMBER] must be a number between 1 and 20.
[PIN] is the correct 4 digit pin code
For example, the following message can be sent to limit the List of Authorisations to
only 3 users: #modlist*3#1234#
Warning: All information on excess users will be automatically deleted once the number
of users saved in the List of Authorisations is changed, if the new number is lower
than the previous one.
• No more than 20 users can be saved on the List of Authorisations
2) To change the Administrator's telephone number:
•
The Administrator's telephone number can be changed by sending an SMS text
message to the device from the Administrator's phone.
Warning: The Administrator's number can only be changed five times. Please contact
Customer Services if the number needs to be changed again after five changes.
•
To change this number, the Administrator must send an SMS message to the device
containing the following text:
#changead*[OLDNUMBER]*[NEWNUMBER]#[PIN]#
Note:
[OLDNUMER] is the Administrator's old number.
[NEWNUMBER] is the new Administrator number.
[PIN] is the correct 4 digit pin code
For example if:
(OLD NUMBER) = +3931111111
(NEW NUMBER) = +3932222222
(PIN) = 1234
SMS Command: #changead*+393931111111*+393932222222#1234#
3) To delete a specific authorised user
•
A specific authorised user can be deleted by sending an SMS message to the device
from the Administrator phone containing the following text:
Note:
[NUMBER] is the user number you want to delete.
[PIN] is the correct 4 digit pin code
For example, send the following command to delete the number +3931234567
from the List of Authorisations: #del*+393931234567#1234#
Warning: The Administrator number cannot be deleted by sending this command.
4) To delete all authorised users
•
All authorised users can be deleted from the List of Authorisations by sending an
SMS message to the device from the Administrator phone containing the following
text:
Note:
[PIN] is the correct 4 digit pin code
For example: #deluser#1234#
Warning: All users will be deleted from the List of Authorisations once the device has
received the command, with the exception of the Administrator.
5) To enter new numbers as authorised users
•
A specific authorised user can be added to the List of Authorisations by sending an
SMS message to the device from the Administrator phone containing the following
text:
09/08/2011
CAMSCC3G
#del*[NUMBER]#[PIN]#
#deluser#[PIN]#
#add*[NUMBER]#[PIN]#
9
Rev. 01
®
©Velleman
nv
Advertisement
Table of Contents
