Table of Contents
Advertisement
•
The network LED [J] will display a yellow light while the device searches for the UMTS
network. This will then turn green and start flashing rapidly. The LED will show battery
levels after it has measured battery capacity. Network status is described below.
•
Once the device is connected to the network, the network LED [J] will turn green and
stops flashing.
•
The device and all its functions are ready for use once the network LED [J] turns green
and the battery LED [H] displays the level charge the battery has.
Activating the service
•
Follow the instructions below to carry out the authentication procedure and activate
video services.
•
Video call the CAMSCC3 with a video phone (dial the number of the device and activate
the video call function from the video phone).
•
A request will be made for a four (4) digit PIN code – found inside the devices' box. This
will activate the transmission of images recorded by the CAMSCC3G. The illustration
below will be displayed on your video phone.
•
Enter the PIN code by pressing the appropriate keys on your video phone.
•
The device will then check the PIN code you entered. If the PIN code is correct, that
telephone number will be added to the device's memory (saved in a list of
authorisations). The number used to make the first call to the device to establish a
connection will be given the title of Administrator. If the PIN code is incorrect you have
two more chances to enter the correct PIN code.
Note 1: The device will automatically disconnect a video call after 3 failed attempts to
enter a PIN code, or after 1 minute.
•
Once authenticated, the device will emit a sound to indicate that the video call has
begun. Images recorded by the CAMSCC3G can then be seen in real time.
09/08/2011
CAMSCC3G
7
Rev. 01
®
©Velleman
nv
Advertisement
Table of Contents
