Problem Solving - Velleman CAMSCC3G Manual

Note: [NUMBER] is the number you want to add to the List of Authorisations.
[PIN] is the correct 4 digit pin code
For example, if you want to add the number +3937654321 to the List as an
authorised user: #add#+393937654321#1234#
Warning: The [NUMBER] will not be added to the List of Authorisations once the
number of numbers saved on the list has reached its limit. The SMS message will be
ignored if the [NUMBER] is already found on the list.
6) To change the PIN code
• The PIN code can be changed by sending an SMS message to the device from the
Administrator phone containing the following text:
Note: [NEW PIN] is the 4 digit number you want to use as a PIN code.
[PIN] is the 4 digit number you want to change.
For example send the following message to change PIN 1234 to a new PIN
0987: #PIN*0987#1234#
Refer to the table below for an overview of all Administrator SMS commands.
SMS Command
#modlist*[NUMBER]#[PIN]#
Example: #modlist*3#1234#
#changead*[OLDNUMBER]*[NEWNUMBER]#[PIN]#
Example: #changead*+393931111111*+393932222222#1234#
#del*[NUMBER]#[PIN]#
Example: #del*+393931234567#1234#
#deluser#[PIN]#
Example: #deluser#1234#
#add*[NUMBER]#[PIN]#
Example: #add*+393937654321#1234#
#pin*[NEW_PIN]#[PIN] #
Example: #pin*0987#1234#
11.

Problem solving

•
A list is provided below describing a series of situations which may take place while the
device is in use. Please check the list before contacting Customer Services.
P1. Restarting the device (resetting procedure)
•
The device can be restarted by pressing the reset button and keeping it pressed for at
least 5 seconds.
Note: The device will be automatically restarted by pressing the reset button. All users
will be deleted from the List of Authorisations, with the exception of the Administrator
and the PIN code.
P2. The Network LED is off
•
Check that the USIM card has been inserted into the USIM slot and that is correctly
locked.
•
If the USIM card has been inserted and locked correctly and the Network Light is still off,
press the reset button for 5 seconds to restart the device.
Note: All users will be deleted from the List of Authorisations once the device is reset,
with the exception of the Administrator.
•
Please contact Customer Services if the device still fails to function properly after it has
been reset.
09/08/2011
CAMSCC3G
#pin*[NEW_PIN]#[PIN] #
10
Description
Use to change the number of users
saved on the List of Authorisations
Use to change the telephone number
belonging to the Administrator
Use to delete a specific authorised
user
Use to delete all authorised users
Use to enter new numbers as
authorised users
Use to change the PIN code
Rev. 01
®
©Velleman nv