VNAV Indicator
Configuring a vNAv profile:
1) Press the FPl Key.
2) Turn the FMS Joystick to select the Vertical Navigation Page.
3) Press the FMS Joystick to activate the cursor.
4) Enter the desired profile into the fields, and press the EXIT Softkey.
Waypoint—Enter any waypoint along the currently active route as the
•
reference waypoint. The reference waypoint defines the target location.
Profile—Enter the descent rate.
•
Altitude—Enter the desired reference waypoint altitude. Select 'Above
•
Waypoint' to use field elevation for airports in the Jeppesen database or 'MSL'
to specify an exact MSL altitude target.
190-00919-00 Rev. D
vNAv Indicator (Panel)
vertical Navigation Page
Garmin GPSMAP 695/696 Owner's Manual
GPS Navigation
39