Installing The Water Filter - Makita VC1310L Instruction Manual

To lock the caster with a stopper, lower the stopper
lever and the caster no longer will rotate. To release the
caster from the locked position, raise the stopper lever.
Locking the caster is convenient when storing the
cleaner, stopping the work on the way and keeping the
cleaner still.
To operate the stopper, move it by hand.
NOTE:
• When moving the cleaner, make sure that the
caster is unlocked. Moving the cleaner with the
caster in the locked position may cause damage
to the caster.
ASSEMBLY
CAUTION:
• Always be sure that the cleaner is switched off
and unplugged before carrying out any work on
the cleaner.

Installing the water filter

6
► 1. Tank cover 2. Powder filter 3. Damper 4. Prefilter
5. Tank 6. Mounting position marking
To pick up water or wet dust, remove prefilter and
damper and then use water filter.
3
► 1. Water filter 2. Tank 3. Mounting position marking
When installing the water filter on the tank, set it tight
at the opening of the tank so that the hook of the water
filter engages the tank opening firmly and there is no
space between the water filter and the tank.
Also, install the water filter so that the mounting position
marking can be aligned.
NOTE:
• Models VC2510L and VC3210L have no mount-
ing position marking and no need to align it.
Installing the paper pack
1
WARNING:
• When using the paper pack, also use the pre-
2
filter together that is preinstalled on the tool.
Failure to use the prefilter together may cause
unusual noise and heat, resulting in a fire.
3
CAUTION:
4
• Never pick up water or other liquids or wet dusts
when using the paper pack. Picking up such
things may cause the paper pack breakage.
5
► 1. Rubber holder
1. Remove the rubber holder.
7 ENGLISH
1
2
1