Maintenance - Makita VC1310L Instruction Manual

NOTE:
• Models VC2510L and VC3210L have no mount-
ing position marking and no need to align it.
• Before using the powder filter, make sure that
prefilter and damper are always used together. It
is not allowed to install powder filter solely.
• Before using the paper pack, make sure that
powder filter, damper and prefilter are always
used together.
Carrying the cleaner
► 1. Handle 2. Head
When carrying the cleaner, carry it by holding the han-
dle on the head as shown in the figure. The handle is
retractable at the head when not in use.

MAINTENANCE

CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
Storage of power supply cord
For Model VC1310L only
► 1. Cord hook 2. Power supply cord
► 1. Power supply cord 2. Base hook
1
Pull out the cord hook or open the base hook. Wind up
the power supply cord and hang it on the cord hook or
2
wind it around the base hook.
NOTE:
• Do not force the power supply cord off the cord
hook when trying to disconnect it from there.
Forcing power supply cord to disconnect from
the cord hook may cause damage to the cord.
For Models VC2510L and VC3210L
► 1. Cord hook 2. Power supply cord
1
2
► 1. Power supply cord 2. Base hook
Wind up the power supply cord around the base hook.
11 ENGLISH
1
2
1
2
1
2