Functional Description - Makita VC1310L Instruction Manual

24. REPLACEMENT PARTS. When servicing, use
only identical replacement parts.
25. STORE IDLE CLEANER. When not in use, the
cleaner should be stored indoors.
26. Be kind to your cleaner. Rough handling can
cause breakage of even the most sturdily built
cleaner.
27. Do not attempt to clean the exterior or interior
with benzine, thinner or cleaning chemicals.
Cracks and discoloration may be caused.
28. Do not use cleaner in an enclosed space where
flammable, explosive or toxic vapors are given
off by oil-base paint, paint-thinner, gasoline,
some mothproofing substances, etc., or in
areas where flammable dust is present.
29. Do not leave the cleaner cord lying on the floor
after you have finished a cleaning job. It can
become a tripping hazard or may cause dam-
age to the cleaner.
30. Do not operate this or any tool while under the
influence of drugs or alcohol.
31. As a basic rule of safety, use safety goggles or
safety glasses with side shields.
32. Use a dust mask in dusty work conditions.
33. This machine is not intended for use by per-
sons including children with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge.
34. Young children should be supervised to
ensure that they do not play with the cleaner.
35. Never handle plug cord or cleaner with wet
hands.
36. Use extreme caution when cleaning on stairs.
37. Do not use the cleaner as a stool or work
bench. The machine may fall down and may
result in personal injury.
KEEP FOR FUTURE
REFERENCE
WARNING: DO NOT let comfort or famil-
iarity with product (gained from repeated
use) replace strict adherence to safety
rules for the subject product. MISUSE or
failure to follow the safety rules stated in
this instruction manual may cause serious
personal injury.

FUNCTIONAL DESCRIPTION

WARNING:
• Before plugging the cleaner, always make sure
that the cleaner is switched off. Plugging the
cleaner with the switch on may cause an unex-
pected start resulting in serious personal injury.
Switch action
1
► 1. Suction force adjusting knob 2. Switch lever
To start the cleaner, rotate the switch lever to the "I"
side. To stop it, rotate the switch lever to the "O" side.
1
► 1. Suction force adjusting knob 2. Switch lever
The suction power can be adjusted according to your
work need.
Suction power can be increased by turning the suc-
tion force adjusting knob from the
the symbol.
Connecting electric power tools
WARNING:
• Observe the maximum connected loads
for the appliance socket (Refer to the
SPECIFICATIONS.)
• Make sure that both the cleaner and the electric
power tool are switched off before connecting
or disconnecting. Connecting the power tool to
the cleaner with both of them being switched on
may cause unexpected and sudden start result-
ing serious personal injury.
4 ENGLISH
2
2
symbol to