Volvo A60H Manual page 17

17. Place the motors into part number #A13/14 (2No). Secure each motor using 2no M3x8mm
bolts. Note for easier access soldering on the cable to the motor terminals should be done
before installing the motors.
Note polarity needs swapping on one side of the vehicle.
18. Add part number #A15 to the back of each rear motor. Hold in place with a dab of hot glue.
Note adding identification to the side which is wired with reversed polarity to aid correct
wiring later.
Version 1 Page 17 28/09/20