KeeNetic HERO KN-2410 Quick Start Manual

Quick Start Guide
AC1300 Dual Band Mesh Wi-Fi Supervectoring VDSL2/ADSL2+
Modem Router with Dual Core CPU, a 5-Port Gigabit Smart
Switch, USB 2.0 and USB 3.0 Ports
Model: KN-2410
Installing Your
Keenetic Hero DSL
1
Position your Keenetic Hero DSL (hereinafter 'Keenetic
device') within cable lengths of phone and power outlets.
Place your Keenetic device in an open area for better
wireless coverage.
2
Connect your Keenetic device to a power source.
Check that both the Status LED C and Wi-Fi LED D
are illuminated and not blinking.
3
Сonnect a mobile device to your Keenetic device via Wi-Fi.
The default Wi-Fi name (SSID) and Wi-Fi password are
printed on your Keenetic device's back label along with a QR
code that will automatically connect your mobile device
to the Keenetic device's Wi-Fi when scanned. Alternatively,
сonnect a computer to any gray Ethernet port on your
Keenetic device using the included Ethernet cable.
4
Once connected, an Initial Setup Wizard window will appear
on your mobile device / computer. If the Wizard does not
appear, using a browser go to my.keenetic.net.
Note: If the Initial Setup Wizard doesn't appear, please refer
to the Frequently Asked Questions section below.
5
In the Initial Setup Wizard window select the
configuration option and follow the setup
instructions.
For technical support or other information, please visit
help.keenetic.com
DSL
10:00
Welcome to
Your Keenetic
Next