Advertisement
Quick Links
KEENETIC
TIT AN
Quick Start Guide
BE7200 Mesh Wi-Fi 7 Multi-Gigabit Router with a 1×10G,
1×2.5G and 4×1G Smart Switch, Multifunctional USB 3.2
and 2.0 Ports
Model: KN-1812
Need help in another language?
Scan the QR code to access the multilingual Quick Start Guide.
https://keenetic.com/qsg/kn-1812
Installing Your Keenetic Titan
1.
Position your Keenetic Titan (hereinafter 'Keenetic device') within
reach of Ethernet and power outlets. Place your Keenetic device
in an unenclosed space for better wireless coverage.
2.
Connect your Keenetic device to a power source. Check that both the
Status LED C and Wi-Fi LED D are illuminated and not blinking.
3.
Сonnect a mobile device to your Keenetic device via Wi-Fi. The default
Wi-Fi name (SSID) and the Wi-Fi password are printed on your Keenetic
device's back label along with a QR code that will automatically connect
your mobile device to the Keenetic device's Wi-Fi when scanned.
Alternatively, сonnect a computer to the gray Ethernet port on your
Keenetic device using the included Ethernet cable.
4.
Once connected, an Initial Setup Wizard window will appear on your
mobile device / computer. If the Wizard does not appear, using
a browser go to my.keenetic.net and follow the setup instructions.
Note: If the Initial Setup Wizard still doesn't appear, please
refer to the Frequently Asked Questions section below.
For technical support and other information, please visit
support.keenetic.com
1
5
3
10:00
Welcome to Your
Keenetic
4
Next
2
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for KeeNetic TITAN KN-1812
Summary of Contents for KeeNetic TITAN KN-1812
- Page 1 Ethernet and power outlets. Place your Keenetic device in an unenclosed space for better wireless coverage. Connect your Keenetic device to a power source. Check that both the Status LED C and Wi-Fi LED D are illuminated and not blinking.
- Page 2 Certification Information be found on support.keenetic.com. WPS-compliant devices to the wireless network. of your Keenetic device, or if you are using a Mesh Wi-Fi System, you should use the password on the FN1 & FN2 Buttons Pressing it once — Starts a quick connection Main Router.
Need help?
Do you have a question about the TITAN KN-1812 and is the answer not in the manual?
Questions and answers