Advertisement
Quick Links
Advertisement
Related Manuals for KeeNetic Extra KN-1711
Summary of Contents for KeeNetic Extra KN-1711
- Page 1 User Guide Learn more about the features of your Keenetic at help.keenetic.com...
- Page 2 We recommend to keep the user settings for all modes, press this button antennas in vertical position. and hold for 10 seconds until the indicator starts flashing. The Keenetic will reboot with the default settings, in the main operation mode.
- Page 3 Network ports "0", "1", "2", "3", "4" Indicator (Status) By default the blue port "0" is used to On — the Keenetic is ready for operation. connect the cable from your ISP, and Off — the Keenetic is turned off. other ports — for home devices.
- Page 4 Wi-Fi on or off. indicates the status of the USB port. In the Keenetic settings you can assign On — the USB device connected to the Keenetic other functions to this button. is ready. Off — a compatible USB device was USB port not found or is not ready.
- Page 5 Configuring with Keenetic web interface The Keenetic must be powered via the cable, using it to connect port 1 of the Keenetic supplied power adapter and ready for to the computer’s Ethernet adapter. work, with the indicator steady on. To access the Keenetic web interface open Connect the computer to the Keenetic.
- Page 6 Connect the Ethernet cable from your If you have an IPTV set-top box or a TV that can ISP to the "0" port on the Keenetic. receive IPTV directly, we recommend to connect it to the Keenetic using an Ethernet cable.
- Page 7 Keenetic using a network cable. connecting via a leased Ethernet line. In order to use all the features of the Keenetic, You can use the connection via DSL or GPON as the modem must be in bridge mode. If the your primary Internet connection or as a backup...
- Page 8 Connect the modem with installed SIM card a USB modem. Place it near a window and to the USB port of the Keenetic. When the make sure there are no obstacles between the modem is ready for operation, the FN indicator modem and the window, to avoid weakening of the Keenetic will light on;...
-
Page 9: Recommendations For Safe Use
⬛ Remove all protective film before operating the ⬛ Never open the Keenetic or its power adapter device. and never try to service them on your own. If you suspect a hardware malfunction, please contact ⬛... - Page 10 Wi-Fi most of follow these guidelines: the time. ⬛ Install the Keenetic in a room where you want ⬛ IEEE 802.11n allows the use of an open network to ensure the fastest wireless connection. Concrete or a network with WPA2 AES security (enabled walls greatly reduce the network speed.
-
Page 11: Information And Support
⬛ Power on the Keenetic, wait for it to power up, that cannot connect to the Internet. Check then turn on the other devices. -
Page 12: Warranty
Keenetic Support Center log at the Keenetics. We strongly recommend to device’s first connection to the Internet, or the make backup copies of important data. - Page 13 When you first connect to the 50/60Hz Internet the service tag is automatically recorded ⬛ Ethernet cable in the Keenetic Support Center log. By using the ⬛ User Guide Keenetic Extra, you agree with right of Keenetic Limited to automatically receive information...
- Page 14 Simplified EU declaration of conformity © Keenetic Limited, 2018. All rights reserved. Keenetic Limited hereby declares that this device Reproduction, adaptation, translation, or is in compliance with Directive 2014/53/EU. distribution of this document or any part thereof The full text of the EU declaration of conformity...