KeeNetic HERO KN-1012 Quick Start Manual

Ax3000 mesh wi-fi 6 multi-gigabit router with a 4-port gigabit and 1-port 2.5 gigabit smart switch, sfp combo port, usb 2.0 and usb 3.0 ports

Download this manual

KEENETIC

HERO

Quick Start Guide

AX3000 Mesh Wi-Fi 6 Multi-Gigabit Router with

a 4-Port Gigabit and 1-Port 2.5 Gigabit Smart Switch,

SFP Combo Port, USB 2.0 and USB 3.0 Ports

Model: KN-1012

Installing Your Keenetic Hero

Position your Keenetic Hero (hereinafter 'Keenetic device') within

cable lengths of Ethernet and power outlets. Place your Keenetic

device in an unenclosed space for better wireless coverage. Connect

your Keenetic device to a power source. Check that both the

Status LED C and Wi-Fi LED D are illuminated and not blinking.

Сonnect a mobile device to your Keenetic device via Wi-Fi. The default

Wi-Fi name (SSID) and the Wi-Fi password are printed on your Keenetic

device's back label along with a QR code that will automatically connect

your mobile device to the Keenetic device's Wi-Fi when scanned.

Alternatively, сonnect a computer to the gray Ethernet port on your

Keenetic device using the included Ethernet cable.

Once connected, an Initial Setup Wizard window will appear on your

mobile device / computer. If the Wizard does not appear, using

a browser go to my.keenetic.net and follow the setup instructions.

Note: If the Initial Setup Wizard still doesn't appear, please refer

to the Frequently Asked Questions section below.

For technical support and other information,

please visit

support.keenetic.com

10:00

Welcome

to the Initial

Setup Wizard

Run wizard

Need help?

Do you have a question about the HERO KN-1012 and is the answer not in the manual?

Page 1 Keenetic device to a power source. Check that both the Status LED C and Wi-Fi LED D are illuminated and not blinking. Сonnect a mobile device to your Keenetic device via Wi-Fi. The default Wi-Fi name (SSID) and the Wi-Fi password are printed on your Keenetic device’s back label along with a QR code that will automatically connect...
Page 2 Keenetic Limited hereby declares that this device to easily add extenders to the Keenetic Wi-Fi antennas. We recommend keeping of your Keenetic device, or if you are using a Mesh is in compliance with all relevant provisions FN 1 F N 2 Mesh Wi-Fi System, or other WPS-compliant the antennas in a vertical position.