Function Keys; Suppressing Noise; Adjusting Brilliance Of Markers; Outputting Target Position - Furuno Marine Radar Operator's Manual

3.11 Function Keys

The function keys (F1 and F2) work like the
auto-dialing feature of a telephone, automati-
cally executing the function assigned to them.
The function can be turned off by pressing
appropriate function key again.
Default settings
F1: Shift (brief press) or Zoom (long press)
F2: Ring brillience
How to register menu items
1. Press the [MENU] key.
2. Press [A/C SEA] (F1) or [A/C RAIN] (F2)
to open the function menu.
[ SETTING FOR F1 KNOB ]
SSel by omnipad & press ENT.S
<Press MENU key to escape>
EBL
SHIFT/
OFFSET
ZOOM
RINGS MODE
INT NOISE
REJECT REJECT
TRAIL TRAIL
ON/OFF TIME
GUARD ALARM
IN/OUT LEVEL
PANEL
MARK
DIMMER BRILL
VRM
EBL
UNIT
REF
CUSOR
OWN
POSITN POSITN
HIS COLLI
TORY SION
Figure 3-11 Function menu
3. Select function desired.
4. Press the [ACQ/ENTER] key.
5. Press the [MENU] key to close the menu.
SHIFT ZOOM
DISP
STBY
DATA DISP
PULSE ECHO
LENGTH STRTCH
TRAIL
TUNE
TONE
A/M
DEAD WATCH
SECTOR MAN
CHARA OTHER
CTERS MENU
NAV WPT
TALKER MARK
VECTOR VECTOR
LENGTH REF
AUTO NO
ACQ
FNCTN

3.12 Suppressing Noise

Electrical noise can be suppressed by turning
on "8. NOISE REJ" on the OTHERS menu.
3.13 Adjusting Brilliance of
Markers
"2. Mark Brill" on the OTHER menu adjusts
the brilliance of markers such as the cursor.

3.14 Outputting Target Position

Target position data can be output to the
navaid in IEC 1162 format. Press and hold
down the [TLL] key to output the data. This
function requires position data and heading
signal.
19