Size & Wide Functions - Brother P-touch 1800 User Manual

The character size can be adjusted using both the Size and Wide functions. Since the
character size that can be used depends on the width of the tape, the following table
shows the character sizes that can be used with each tape width.
The default size setting is AUTO and the default width setting is OFF. The currently
selected size setting is always shown by the indicator above the display.
With the AUTO size setting, the machine compares your text with the width of the
installed tape and automatically adjusts the characters to the largest possible size. How-
ever, six other point sizes are also available and each can be printed in wide characters.
Size
setting (in Wide function OFF
points)
6
9
12
18
All manuals and user guides at all-guides.com
SIZE & WIDE FUNCTIONS
Tape widths
6 mm
9 mm
12 mm
18 mm
Sizes (in points)
6, 9, 12
6, 9, 12, 18
6, 9, 12, 18, 24
6, 9, 12, 18, 24, 36
Wide function ON
53