Brother P-touch 1800 User Manual page 87

Error Message
NUMBER
TOO SMALL!
REPLACE
BATTERIES!
ROM
PROBLEM!
SYSTEM
ERROR!
TAB
LIMIT!
TAPE
EMPTY!
TEXT
HIGH!
TEXT
LONG!
All manuals and user guides at all-guides.com
Cause
• This message appears if
the number that is set to be
printed using the Number-
ing function is less than the
number above the cursor.
• This message appears if
the installed alkaline bat-
teries are about to run out.
• This message appears if
there is a problem with the
machine's read only mem-
ory.
• This message appears if
there is a problem with the
machine's software.
• This message appears if 50
tabs have already been
added to the text when you
Tab Set
press .
Q
• This message appears if you
try to print a label or feed
the tape when no tape cas-
sette is installed.
• This message appears if
the size of the text is larger
than the width of the
installed tape.
• This message appears if
the length of the text is
longer than the label
length that has been set
using the Length function.
Remedy
• Press the key of a number
that is greater than the
number in the text.
• Replace the batteries or
use the AC adapter.
• Contact your service repre-
sentative.
• Contact your service repre-
sentative.
• Limit the number of tabs in
the text to 50.
• Install a tape cassette and
try again.
• Reduce the size of the
characters or install a
wider tape.
• Delete some of the text,
reduce the character width
or increase the set label
length.
83