Length Function - Brother P-touch 1800 User Manual

Although the length of the printed label automatically adjusts to fit the length of the
entered text, there may be times when you will want to make a label with a specific
length. The Length function allows you to set the label length between 4.0 and 30.0 cm.
The default length setting is OFF. When the Length function is set to ON, the Length indi-
cator on the right side of the display lights up.
Turning off the machine and turning it on again changes the length setting back to
OFF.
To turn on or off the Length function:
1
While holding down
play the current length of the label (the text and both margins) briefly, then display
the current label length setting (ON or OFF).
2
While still holding down
length setting is displayed.
The Length indicator lights up when ON is selected.
3
Release
Code
4
Press Home or
length.
To change the length in 1.0-cm-steps, hold down either
then release the key when the desired setting is displayed.
5
Press .
All manuals and user guides at all-guides.com

LENGTH FUNCTION

Length
, press
Code
, continue pressing
Code
. If ON was selected, the current label length setting is displayed.
to select the desired length or use the number keys to enter the
End
once, and keep
T
Length
T
held down to dis-
Code
until the desired label
or , and
Home
End
69