Brother P-touch 1800 User Manual page 86

Error Message
LENGTH
LIMIT!
LINE
LIMIT!
MEMORY
FULL!
NO
FILES!
NOT
HERE!
82
All manuals and user guides at all-guides.com
Cause
• This message appears if the
text is longer than 1 meter
when you try to print.
• This message appears if
the Length function is used
to set a label length that is
less than 4.0 cm or more
than 30.0 cm.
• This message appears if
the Tab Length function is
used to set a tab length
that is more than 30.0 cm.
• This message appears if
the number of lines in the
text is greater than the
maximum number of lines
possible for the installed
tape.
• This message appears if
you try to store a text file
after 300 characters have
already been stored in the
memory.
• This message appears if
you try to recall or delete a
text file from the memory
when none are stored.
• This message appears if
the cursor is at the end of
the text when you hold
down and press
Code
Number
.
O
ö
Remedy
• Shorten the text to less
than 1 meter before trying
to print.
• Set the label length
between 4.0 cm and 30.0
cm.
• Set the tab length so that it
is less than 30.0 cm.
• Reduce the number of
lines or install a tape of
greater width.
• Delete an unwanted file to
make room for the new
one.
• Store a text file first.
• Move the cursor below a
number before holding
down and press-
Code
Number
ing .
O
ö