Moving And Removing The Packing; Thermal Module Assembly - Beretta POWER MAX Installation And Operation Manual

2.5 Moving and removing the packing

b
Do not remove the cardboard packaging until your reach the
installation location.
b
Before handling the appliance and removing the packaging,
wear PPE and use tools suitable for the appliance's size and
weight.
b
This step must be carried out by several individuals equipped
with suitable means with respect to the appliance's size. Make
sure that the load is not unbalanced during handling.
Proceed as follows to remove the packing:
- Remove the strapping that secures the cardboard packaging
to the pallet
- Remove the cardboard
- Remove edge protectors (1)
- Remove the Styrofoam protection (2)
- Remove the protective bag (3)
2
3
1

2.6 Thermal module assembly

Thermal modules POWER MAX are supplied complete with a
wall-mounting bracket.
b
Check that the wall on which the appliance is to be fitted is
sufficiently solid and supports safe screw fixing points.
b
The appliance's height must be selected so as to facilitate dis-
mantling it and maintaining it.
Model
POWER MAX 50 P DEP
POWER MAX 50 P
1
POWER MAX 65 P
POWER MAX 80 P
POWER MAX 100
POWER MAX 110
POWER MAX 130
POWER MAX 150
1
For installation:
- Position the bracket (1) onto the wall (2), at the point where you
- Ensure that the bracket is horizontal and mark the points where
- Drill the holes and insert expansion plugs (3)
- Fix the bracket to the wall using the screws (4)
- Secure the appliance onto the bracket
wish to install the appliance
the holes for fixing plugs must be drilled
3
1
4
H
Height (H) mm
1850<H<2000
1850<H<2000
1850<H<2000
1850<H<2000
1850<H<2000
1850<H<2000
2000<H<2150
2000<H<2150
17
2