All manuals and user guides at all-guides.com User's Guide for CTS6000 Control panel Version 1.00 Contents Contents ............................2 Introduction ............................. 3 Control panel menus ........................4 Alarm log/event log ........................4 Weekly program .......................... 5 Language selection ........................5 Date and time ..........................
Version 1.00 Introduction The CTS6000 control panel allows functions that are necessary for everyday operation to be viewed and altered. It is thus possible to change various temperature settings, reset alarms and start the unit outside the usual operating period. The CTS6000 control panel supplements CTS6000 WebControl, the program in which more advanced settings are made.
All manuals and user guides at all-guides.com User's Guide for CTS6000 Control panel Version 1.00 Control panel menus The panel consists of a "Power" button, an "Alarm" button, four arrow buttons and a "Set" button. The buttons have the following functions. Pressing any button for the first time activates the backlit display.
NOT follow the weekly program. If "Start extended operation" is selected, the unit will continue to run for an additional 2 hours (the duration can be changed via CTS6000 WebControl). Weekly program The control panel can be used to change the required temperature and start/stop times in the weekly program (setpoints for fan speed or duct pressure can, however, only be changed via CTS6000 WebControl).
All manuals and user guides at all-guides.com User's Guide for CTS6000 Control panel Version 1.00 Language selection "LANGUAGE SELECTION" is located in the menu shown in Figure 2. The language used in the displays can be changed under "LANGUAGE SELECTION".
Page 7
All manuals and user guides at all-guides.com User's Guide for CTS6000 Control panel Version 1.00 Figure 8 Manual mode parameters setting Figure 9 Manual mode parameters setting These actions are available: 1. Parameters view: Buttons Right, Left, Up, Down use for selecting of the parameter(s) or part of parameter 2.
Page 8
All manuals and user guides at all-guides.com User's Guide for CTS6000 Control panel Version 1.00 Figure 10 Java GUI manual mode, in PI Diagram Subject to alteration without notice. NILAN A/S Page 8 of 11...
All manuals and user guides at all-guides.com User's Guide for CTS6000 Control panel Version 1.00 Menu overview MONDAY PROGRAMME : 1 2- PROGRAM POINT : AKTIVE TIME. : 17:00 VENTILATION : NORMALE Statusmenu Week programme SET POINT: 20,0 COPY TO NEXT:...
All manuals and user guides at all-guides.com User's Guide for CTS6000 Control panel Version 1.00 Description of alarms Alarm name Description Remedy Door open Door to fans is open. Ventilation unit Close door and reset alarm. ID 32 Level - 4 stops in order to prevent personal injury.
Page 11
All manuals and user guides at all-guides.com User's Guide for CTS6000 Control panel Version 1.00 Alarm name Description Remedy Timeout for The prevention function for high or low Reset alarm. alarm prevention function pressure alarms has run for more than...
Need help?
Do you have a question about the CTS6000 and is the answer not in the manual?
Questions and answers