Consumables And Regular Replacement Components; Parts Number And Replacement Cycle Of Consumables And Regular Replacement Components; Procedure For Replacing The Pad Unit - Fujitsu fi-4110CU Operator's Manual

Image scanner
Hide thumbs Also See for fi-4110CU:
Table of Contents

Advertisement

4.4 Consumables and Regular Replacement Components

4.4.1 Parts Number and Replacement Cycle of Consumables and Regular
Replacement Components
Parts number and replacement cycle of consumables (standard) and regular
replacement components are shown below.
No.
Component name
1
Pad unit
2
Pick roller unit
The replacement cycle is estimated for A4 high-quality paper (55 kg/ream (64 g/m
and differs depending on the type of paper to be used.
u Key point
Toward the end of the replacement cycle, the device driver outputs a replacement
message.

4.4.2 Procedure for Replacing the Pad Unit

Replace the pad unit through the following procedure:
1) Remove any documents from the document support.
2) Open the automatic document feeder by pulling it toward you while raising the
cover open lever.
3) Remove the pad unit.
Step 1:
Step 2:
4-6
Fire or electrical shock
- When replacing any of the equipment's
consumables , first turn off the power , then
disconnect the interface cable and
disconnect the AC adapter power plug from
the outlet.
Be aware of high – temperature in the glass
surface of Automatic Document Feeder
(ADF). It could result in a burn.
Parts No.
0961192
0961193
Push the pick arm in the automatic document feeder in the arrow
direction.
Pull out the pad unit by using such as a ballpoint pen at both ends
(a and b) of the pad unit.
Replacement cycle (standard)
Every 12,000 sheets or annually
Every 50,000 sheets or annually
fi-4110CU Image Scanner Operator's Guide
2
),

Advertisement

Table of Contents
loading

This manual is also suitable for:

C150-e194-01en

Table of Contents