Confirming The System Conditions; Connecting The Power Cable - Fujitsu fi-4110CU Operator's Manual

2.3.2 Confirming the System Conditions

The following environments are required for connecting this scanner to the computer to
read images.
System
OS
Interface
u Note
- If your computer is updated to Windows 98 from Windows 95 or NT, the USB

2.3.3 Connecting the Power Cable

1) Connect the power cable to the inlet of the scanner.
2) Insert the AC adapter into the outlet.
u Key point
- The image scanner is not equipped with a power switch. When connecting a
- While the driver and the software is active, the reading lamp turns on or off in
2-4
Windows 98 preinstall version
Windows 2000 preinstall version
Windows ME preinstall version
The computer has a built-in USB port and the computer maker certifies
that the port operates correctly.
port, even if provided, cannot be used.
ACアダプタ用コネクタ
Inlet
cable or changing the setting, first be sure to disconnect the power cable from
the outlet.
accordance with the status of the connected personal computer.
Conditions
fi-4110CU Image Scanner Operator's Guide