Table of Contents
Advertisement
3.3 Scanning Documents
This section explains how to scan documents.
1) Make sure that the powers of the personal computer and the scanner
are ON.
2) Check the document condition.
For details, see Section 3.2.1, "Confirming Document Condition."
3) Before setting documents, sufficiently loosen them.
For details, see Section 3.2.2, "Setting Documents."
4) Set the documents on the document support.
- Estimate the number of pages to be set based on the following standard:
- Level the end of documents to be set.
- Set the documents as follows.
- Insert the documents in the automatic document feeder until they softly touch
fi-4110CU Image Scanner Operator's Guide
Base side
The document thickness must be 4 mm or less (50 sheets by 55 kg/ream (64
2
g/cm
) paper) for A4 or legal size or smaller.
For details, see Section 3.2.2, "Setting Documents."
à
For single-side reading: Place the reading side facing down (document
support surface).
à
For double-sided reading: Place the surface (first page) facing down
(document support surface).
the back of the automatic document feeder. Excessively strong insertion
results in feeding multiple pages simultaneously. Also, make sure that the
ends of the pages are not folded down.
Set the documents
3-5
Advertisement
Table of Contents
