Adjusting The Picture - Fujitsu plasmavision User Manual

ADJUSTING THE PICTURE

• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU
OPERATIONS on page E-20 for the basic operation procedures.
Adjusting the Signal Contrast
Press to increase the input signal contrast.
Press to reduce the input signal contrast.
Press to store.
Adjusting the Drive Contrast
Press to raise the display's luminance level, and increase the contrast.
Press to lower the display's luminance level, and reduce the contrast.
Press to store.
Adjusting the Brightness
Press to increase the brightness.
Press to reduce the brightness.
Press to store.
Adjusting Color
Press to darken the color.
Press to lighten the color.
Press to store.
Adjusting the Tint
Press to change the tint to a more greenish color.
Press to change the tint to a more purplish color.
Press to store.
Adjusting the Sharpness
Press to sharpen the Sharpness.
Press to soften the Sharpness.
Press to store.
Adjusting the Ambient Sensor
Automatically adjusts the Sharpness to an optimized level that matches the brightness of the surrounding area.
Each time or is pressed, the setting is switched.
On Off
Press to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-21