Selecting Input Mode - Fujitsu plasmavision User Manual

SELECTING INPUT MODE

VIDEO INPUT MODE (for the W/R models)
* You can also use the buttons
on the display's control
panel to perform these steps.
VIDEO INPUT MODE (for the U model)
* You can also use the buttons
on the display's control
panel to perform these steps.
E-14
1
Press -
mode.
You can select from VIDEO1 mode to VIDEO4
mode.
The video modes corresponding to each input
terminal are as follows.
• VIDEO1: Video
• VIDEO2: S-video
• VIDEO3: Component video
• VIDEO4: Component video
* For selection of the input terminal, see
"SETTING THE INPUT TERMINALS" on
P. E-31.
1
Press -
mode.
You can select from VIDEO1 mode to VIDEO5
mode.
The video modes corresponding to each input
terminal are as follows.
• VIDEO1: Video
• VIDEO2: S-video
• VIDEO3: Component video
• VIDEO4: Component video
• VIDEO5: HDMI
* For selection of the input terminal, see
"SETTING THE INPUT TERMINALS" on
P. E-31.
to select the input
to select the input
Video1 mode
Video1 mode