Front Display; Part Names And Functions - Fujitsu plasmavision User Manual

PART NAMES AND FUNCTIONS

DISPLAY SECTION – FRONT
Warning
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
E-4
 Power indicator lamp
(Right section)
This lamp shows the state of the power supply.
Lit (red):
Lit (green):
Flashing (red or green):
 Remote control signal receiver
Receives signals from the remote control.
 Input mode selector button
 Input mode selector button
Switches between picture input modes.
 VOL + button
 VOL - button
Adjusts the audio volume.
 Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
 ON/OFF button
Turns the power "ON" and "OFF (standby state)".
 Ambient Sensor
Detects the brightness of external light.
Do not obstruct it.
Stand-by state
Power ON state
Malfunction (Flashes differently
depending on the type of
malfunction.)
[MODE]
[MODE]