Fujitsu plasmavision User Manual page 46

OTHER ADJUSTMENTS (Continued)
OTHER SETTINGS
Auto Off-NO SIG.
You can make to the standby state automatically when the no signal state continued during set up time.
Press to select the "Time".
Press to select the amount of time before the standby state starts.
Press to store.
* The numerical value is the approximate amount of time before the standby state starts.
You can assign the black or white color for the background color at the no signal state.
Press to select the "Background".
Press to select the displayed background displayed.
Black White
Press to store.
* The background color changes to assigned color state after approximate 20 seconds at the no signal
state.
•Selecting input terminals (Audio Input)
You can use this option to select the available terminals to receive the audio from input equipment.
(1) Select "Audio Input" and press
The "Audio Input" selection screen will appear.
(2) Press or to select video input terminal.
(3) Select a related audio input terminal.
Each time you press
[No audio]: No audio in the corresponding mode.
[Audio 1-3]: Selects Audio 1 through 3 for receiving audio in the corresponding mode.
[Audio 4]: HDMI(for the U model)
* Repeat steps (2) and (3) for each piece of input equipment.
(4) Press to store.
* Audio Input menu will not be displayed when "No Audio" is selected.
E-32
.
or , one of the available choices appears in the following sequence:
Auto Off-NO SIG. settings
screen
"Audio Input" selection screen
(In the case of the U model)