Adjusting The Picture Size And Position; Adjusting The Volume; Setting Colour Temperature And Colours - Fujitsu P24W-6 IPS Operating Manual

Adjusting the picture size and position

Phase
Clock
H-Position
V-Position
Sharpness
Saturation
Expansion

Adjusting the volume

Volume
Mute

Setting colour temperature and colours

Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Call the Image adjust setting window
Eliminate picture disturbance
With this function you fine-tune your monitor to eliminate picture disturbance.
Set synchronisation
With this function you adjust the picture width to eliminate vertical picture
disturbances.
Adjust the horizontal position
With this function you move the picture to the left or to the right.
Adjust the vertical position
With this function you move the picture up or down.
Adjust the sharpness of the picture for the Photo and Video modes.
Adjust the saturation for the Photo and Video modes.
Adjust the picture size
Full screen = selection of full screen mode
Keep aspect = maximum picture size without distortion (only for PC image)
Call the Audio setting window
Set the volume for playback with the integrated loudspeakers
Switch the loudspeakers off or on
Call the Colour setting window
Select the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The
colour temperature is measured in K (= Kelvin). You can choose between
sRGB, 6500 K, 7500 K, 9300 K, Native and Custom Colour.
The options sRGB, Native and Custom colour are only available in the Office
setting mode.
In the user-defined setting you can change the colour ratios of the basic
colours (red, green, blue) as required.
Operation
25