Installation Procedure; Preparing The Cooktop; Installing The Pressure Regulator - Bosch NGMP058UC Installation Instructions Manual

*For installation in a kitchen island.
4 Installation procedure

Installation procedure

Follow these instructions to install the cooktop into the
Installation procedure
countertop.
CAUTION
Sharp edges.
Use protective gloves when installing the appliance.
▶
CAUTION
The appliance is heavy.
It is recommended that two people install this appliance.
▶
4.1 Preparing the cooktop
Place the cooktop face down on a soft and stable sur-
1.
face.
Apply the included foam sealing tape around the edges
2.
of the underside of the appliance.
Attach the hold-down brackets to the underside of the
3.
cooktop with the provided short screws and washers.
Do not tighten the screws.
4.2 Installing the pressure regulator
WARNING
Do not attempt any adjustment of the pressure regulator,
except when converting to propane. Adjustments could
lead to leaks or cause incorrect gas pressure to the appli-
ance.
Identify the parts of the pressure regulator.
1.
a Appliance manifold connection
b Conversion nut
c Pressure regulator
Install the pressure regulator supplied with the cooktop
2.
to the appliance manifold connection. Apply Teflon®
tape on the threads of the manifold pipe.
Turn the pressure regulator to hand tighten plus ¼ turn,
3.
not exceeding 1 turn for alignment.
a When the regulator is securely installed on the manifold
pipe, the conversion nut will be easily accessible.
4.
WARNING Make sure the used gas connection
line is not connected to the gas supply, before carrying
out the following steps.
Connect a ½" metal flex gas line or fixed metal pipe
connection to the pressure regulator. Always install a
new gas connection.
Installation procedure en-us
9